![]() The body can be mounted with carbon fiber tubes 8 mm as reinforcement. You can choose to mount one or two wing locks on each side. Servo is mounted in the servo box in Wing section 2. Tips: If needed, clear holes with a drill. The wing is fitted with carbon fiber tubes 8 mm as reinforcement. On the underside of the sections there is a mark "L" and "R" to help. The wing is in fact not really symmetrical so be sure to mount it correctly. The wing, right and left consists of 6 sections plus end cap. Rudder-horn and Wing-lock pc, Servo-box uses 2 Outline/Perimeter and 100% infill. Motor Mount1 uses 2 Outline/Perimeter and 70% infill, Motor Mount2 uses 2 Outline/Perimeter and 25% infill. Landing Gear uses 4 Outline/Perimeter and 50% infill. ![]() These settings apply with some exceptions. The settings I use may need to be adjusted to your requirements. ![]() STL files includes in this download for a complete RC-plane. Weight ready to fly (Depending on your equipment): 2550 g Wing area: 29.6 dm2Ĭentre of Gravity: 90 mm to 105 mm from wing front edge.įor pushrod you can use carbon fiber rod 2/1 mm and music wire 1mm. Length: 1250 mm Weight empty: 1450 g (PLA) Working instructions Extra 300 – 3D Printable This RC model is designed to print in a regular desktop 3D printer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |